Driving School Melbourne Manual car Driving Lessons
Driving school Melbourne Auto car Driving Lessons
VAN.N Driving School is a Melbourne driving school with experienced instructors offering high quality driver & Driving test training through all Melbourne western suburbs
Best Driving School Cheap Driving Lesson Melbourne
Driving Test pre- drive check
All Melbourne Vicroads
Driving Test Deer Park, Sunbury, Melton, Werribee, Broadmaedows, Bundoora, Carlton
drive test Pre-drive check
Before you begin the on road component of the drive test, the licence testing officer will instruct you to:
Identify and operate the following vehicle controls:
indicators
windscreen washer and wipers
horn
headlights (high and low beam)
hazard lights
brake lights.
Identify the handbrake.
Identify but not operate the following vehicle controls:
windscreen demister
rear window demister (where fitted).
Start the engine.
If you are unable to satisfy items 1 and 2, or if any of the controls are not operating correctly, you will not be permitted to take the drive test.
If you are unable to identify a control in item 3, you will be shown the control. If during the drive test, a situation occurs which requires the use of one of these controls and you require assistance, the drive test will be terminated and you will be unsuccessful.
During the drive test
You must consistently demonstrate safe driving behaviours while driving in different traffic conditions. During the drive test, the licence testing officer will be assessing you on:
observation
signal use
gap selection
speed choice
following distance
lateral position
stop position
parking
control.
For more information please refer to the Driving Instructors Drive Test Criteria [PDF 1.8 Mb].
Stage one is designed to assess your safety as a driver in less challenging conditions. The testing officer will give you simple, clear instructions during the test (eg. at the next street, turn right). You must follow their instructions and show that you can drive safely and efficiently. If you’re unsure of an instruction, ask for it to be repeated.
Stage one will take about 10 minutes to complete. The testing officer will then instruct you to stop safely at the kerb while they calculate your score.
If during stage one, you do anything unsafe or illegal, the drive test will be terminated and you will be unsuccessful.
Stage one may include
Starting and stopping the vehicle.
Left and right turns at intersections.
Changing lanes.
Stage one also includes a low speed parking manoeuvre. The testing officer will instruct you to complete one of the following:
reverse park
three point-turn.
Talk to your driving instructor or supervising driver if you’re unsure about how to do these.
If you pass stage one you will progress to stage two. Stage two is conducted in busier traffic and is designed to assess your ability to safely execute normal driving tasks. The testing officer will give you simple, clear instructions during the test (eg. at the next street, turn right). You must follow their instructions and show that you can drive safely and efficiently. If you’re unsure of an instruction, ask for it to be repeated.
Stage two will take about 20 minutes to complete.
If during stage two you do anything unsafe or illegal, the drive test will be terminated and you will be unsuccessful.
Stage two may include
Driving in busy traffic.
Changing lanes.
Merging with other traffic.
Driving on straight and curved roads.
Driving Lessons Pricing